[yenvv] 1000W 48V Electric Motor Brushed Controller + Throttle Grip Fits Standard 7/8 inches(22mm) Handle Bars COD
Description:
Electric bike scooter twist throttle accelerator with power display, 5 LED battery indicator.
Fits standard 7/8 inches(22mm) handle bars
Cable length is approximately 59 inches (1.5m)
Specification:
Electric Motor Brushed Controller:
| Rated Voltage | DC 48V |
| Current Limit | 32A |
| Rated Power | 1000W |
| Under Voltage Protection | 42V |
| Matching Motor | DC brushed motor |
Throttle Twist Grips:
| Throttle Works Voltage | DC5V |
| Speed Adjusting Signal | 0.8V-4.3V |
| Power Display Voltage | DC 48V |
Power Display:
| Normal | 48V above, 3 Led Green |
| Half | 47V ~ 42V, Led Yellow |
| Empty | 42V or less, Led Red |
| Rotation Angle | 0°~ 70° |
| Working Temperature | -20。 ~ +50。 |
Controller Wires Interface Definition:
| Battery | Thick black (power negative) /thick red (power positive) |
| Motor | Thick yellow (motor negative) /thick blue (motor positive) |
| Ignition Switch | Thin red(VCC)/thin blue |
| Indicator | Thin red (indicator power output) /thin black (indicator negative) |
| Brake | Thin yellow (brake signal)/thin black(negative power) |
| Speed Governor | Thin blue(speed handlebar signal input) /thin black (negtive power) /thin red(5V positive power) |
| Charge Port | Thin red (charge input power positive) /thin black (power negative) |
| Sport | Thin yellow /thin green(speed limit, connected the wires together) |
Package Included:
| 1X | Throttle Grip + Normal Grip Set |
| 1X | Brushed Controller |
| 2X | Keys |
1000W 48V Electric Motor Brushed Controller + Throttle Grip Fits Standard 7/8 inches(22mm) Handle Bars
CODDownload NowView Gallery
